Husqvarna ProFlex 21 manual Removing the Rider’s covers, Engine cover, Front cover

Page 34

MAINTENANCE

Removing the Rider’s covers

Engine cover

1.Push the seat to its most forward position and then tip it back.

2.Turn the cover lock on the top of the engine cover anti-clockwise a 1/4 turn.

3.Fold up the engine cover.

If necessary the engine cover can be lifted off by removing the hinge pins.

8009-509

8009-510

Front cover

Loosen the quick-action catch and lift off the front cover.

The Right-hand wing cover

Remove the accelerator knob (1), screws (2 and 3), and remove the wing cover.

6016-106

2

1

3

6008-203

English-32

Image 34
Contents Rider ProFlex 18 Rider ProFlex Svenska Contents Operator’s Manual for Rider ProFlex 18 and ProFlexImportant Information Introduction IntroductionProper Service Serial NumberExplanation of Symbols Symbols and decalsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx Safety instructions Safety InstructionsGeneral use Keep children away from the work area Driving on slopes Do not drive down slopes with the unit raised Do as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Choke Lever Throttle ControlAccelerator Lights and power outlet AccessoriesCutting unit Lifting the cutting unit transport position Cutting height adjustment leverLever for hydraulic lift of attachments, PF Lowering the unit mowing positionTransport position Mechanical lifting lever for cutting unitMowing position Seat Parking brakeFuelling Clutch control Differential lock, PFChronometer Driving Mowing tipsStarting the engine DrivingBefore Starting Impaired cooling of the engine. Risk of major engine damageDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance MaintenanceMaintenance schedule = Described in this manual = Not described in this manual English-31 Front cover Removing the Rider’s coversEngine cover Right-hand wing coverChecking the engine’s cooling air intake Left-hand wing coverTransmission cover Cleaning the engine and muffler Checking the transmission air intakeChecking and adjusting the steering cables Checking and adjusting the choke cable Checking and adjusting the throttle cableAdjusting the differential lock, PF Adjusting the hydrostatic transmission cable Cable holderAdjusting the parking brake Poorly adjusted brake can result in reduced braking abilityReplacing the air filter Replacing the air filter, PFEnglish-40 English-41 Replacing the fuel filter Cleaning the pulse air filterChecking the fuel pump’s air filter Ignition system Checking the battery acid levelChecking the tyre pressures Wrong spark plug type can damage the engineFuses Replacing the spark plugChecking the safety system Replacing the light bulbs Attaching the cutting unit Cutting unit componentsExercise caution Risk of crush injuries Watch your fingers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Cutting height ParallelismReleasing the service position Cutting unit’s service positionPlacing in the service position Ground pressureCutting unit model Checking the bladesRemoving the cutting unit Exercise caution. Risk of crush injuriesPull out the unit so that it catches on the outer hooks Removing the unit frame Removing the beltAttaching the belt Hook the spring to the blade brakeChanging the cutting unit’s belt Removal of BioClip Plug Lubrication LubricationLubrication schedule, PF English-60 General Lubricating the cablesLubricating in accordance with the lubrication schedule Pedal mechanism in frame tunnelChains in the frame tunnel Differential lock cable, PFEngine oil Oil is topped up through the hole the dipstick sitsReplacing the engine oil Transmission Gear leverDriver’s seat Throttle and choke cables, lever bearings Hydraulic oil filter, change, PF Oil filter, changeParking Brake Cable Transmission oil levelEnglish-70 Trouble Shooting Guide Trouble ShootingProblem Cause English-72 Storage StorageWinter Storage Service Electrical and Hydraulic Systems Electrical systemEnglish-76 Hydraulic system, PF English-78 Technical Data Technical dataTransmission Data Rider ProFlex Hydraulic SystemCutting unit Combi EU Declaration of Conformity only applies to Europe EU Declaration of ConformityEU Declaration of Conformity ProFlex 18 01/901/009 ProFlex 21 01/901/010English-82 Action Service JournalService journal After the First 8 HoursAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02