Husqvarna ProFlex 21 manual Stopping the engine, PF

Page 27

DRIVING

4.Depress the lock button on the mechanical lifting lever and move the lever to its most forward position. The cutting unit lowers and starts.

8009-555

Stopping the engine, PF 18

If the engine has been worked hard, it is preferable to let the engine idle for a minute so it runs at its normal working temperature when stopped. Avoid idling the engine for long periods, as there is a risk of carbon build-up on the spark plugs.

1.Raise and secure the cutting unit by pulling the mechanical lifting lever backwards to the locked position.

If the cutting unit is left in the lower position, the start lock circuit will prevent you starting the engine.

8009-554

2. Move the throttle control to the “MIN” position. Turn the ignition key to “STOP”.

8009-561

3. When the machine is at a standstill apply the parking brake by holding down the pedal and at the same time press in the release button.

8009-328

English-25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Rider ProFlex 18 Rider ProFlex Svenska Operator’s Manual for Rider ProFlex 18 and ProFlex ContentsImportant Information Introduction IntroductionSerial Number Proper ServiceSymbols and decals Explanation of SymbolsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx Safety Instructions Safety instructionsGeneral use Keep children away from the work area Do not drive down slopes with the unit raised Do as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Throttle Control Choke LeverAccelerator Accessories Lights and power outletCutting unit Lowering the unit mowing position Cutting height adjustment leverLever for hydraulic lift of attachments, PF Lifting the cutting unit transport positionMechanical lifting lever for cutting unit Transport positionMowing position Parking brake SeatFuelling Differential lock, PF Clutch controlChronometer Mowing tips DrivingImpaired cooling of the engine. Risk of major engine damage DrivingBefore Starting Starting the engineDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance MaintenanceMaintenance schedule = Described in this manual = Not described in this manual English-31 Right-hand wing cover Removing the Rider’s coversEngine cover Front coverLeft-hand wing cover Checking the engine’s cooling air intakeTransmission cover Checking the transmission air intake Cleaning the engine and mufflerChecking and adjusting the steering cables Checking and adjusting the throttle cable Checking and adjusting the choke cableAdjusting the differential lock, PF Cable holder Adjusting the hydrostatic transmission cablePoorly adjusted brake can result in reduced braking ability Adjusting the parking brakeReplacing the air filter, PF Replacing the air filterEnglish-40 English-41 Cleaning the pulse air filter Replacing the fuel filterChecking the fuel pump’s air filter Wrong spark plug type can damage the engine Checking the battery acid levelChecking the tyre pressures Ignition systemReplacing the spark plug FusesChecking the safety system Replacing the light bulbs Cutting unit components Attaching the cutting unitExercise caution Risk of crush injuries Watch your fingers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Parallelism Cutting heightGround pressure Cutting unit’s service positionPlacing in the service position Releasing the service positionChecking the blades Cutting unit modelExercise caution. Risk of crush injuries Removing the cutting unitPull out the unit so that it catches on the outer hooks Removing the belt Removing the unit frameHook the spring to the blade brake Attaching the beltChanging the cutting unit’s belt Removal of BioClip Plug Lubrication LubricationLubrication schedule, PF English-60 Lubricating the cables GeneralPedal mechanism in frame tunnel Lubricating in accordance with the lubrication scheduleDifferential lock cable, PF Chains in the frame tunnelOil is topped up through the hole the dipstick sits Engine oilReplacing the engine oil Gear lever TransmissionDriver’s seat Throttle and choke cables, lever bearings Oil filter, change Hydraulic oil filter, change, PFTransmission oil level Parking Brake CableEnglish-70 Trouble Shooting Trouble Shooting GuideProblem Cause English-72 Storage StorageWinter Storage Service Electrical system Electrical and Hydraulic SystemsEnglish-76 Hydraulic system, PF English-78 Technical data Technical DataData Rider ProFlex Hydraulic System TransmissionCutting unit Combi ProFlex 18 01/901/009 ProFlex 21 01/901/010 EU Declaration of ConformityEU Declaration of Conformity EU Declaration of Conformity only applies to EuropeEnglish-82 After the First 8 Hours Service JournalService journal ActionAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02
Top Page Image Contents