Operator’s Manual for
Rider ProFlex 18 and ProFlex 21
Contents |
|
Contents | 1 |
Introduction | 3 |
Congratulations | 3 |
Driving and Transport on Public Roads | 3 |
Towing | 3 |
Use | 3 |
Proper Service | 4 |
Serial Number | 4 |
Symbols and decals | 5 |
Safety instructions | 7 |
General use | 7 |
Driving on slopes | 9 |
Children | 10 |
Maintenance | 10 |
Transport | 12 |
Presentation | 13 |
Placement of Controls | 14 |
Throttle Control | 15 |
Choke Lever | 15 |
Accelerator | 15 |
Cutting unit | 16 |
Accessories | 16 |
Lights and power outlet | 16 |
Cutting height adjustment lever | 17 |
Lever for hydraulic lift of attachments, PF 21 | ....17 |
Mechanical lifting lever for cutting unit | 18 |
Parking brake | 19 |
Seat | 19 |
Fuelling | 19 |
Differential lock, PF 21 | 20 |
Clutch control | 20 |
Chronometer | 20 |
Mowing tips | 21 |
Clutch control | 21 |
Driving | 22 |
Before Starting | 22 |
Starting the engine | 22 |
Driving the Rider, PF 18 | 24 |
Stopping the engine, PF 18 | 25 |
Driving the Rider, PF 21 | 26 |
Differential lock, PF 21 | 27 |
Stopping the engine, PF 21 | 27 |
Maintenance | 29 |
Maintenance schedule | 29 |
Removing the Rider’s covers | 32 |
33 | |
Checking the engine’s cooling air intake | 33 |
Cleaning the engine and muffler | 34 |
Checking the transmission air intake | 34 |
Checking and adjusting the steering cables | .....35 |
Checking and adjusting the throttle cable | 36 |
Checking and adjusting the choke cable | 36 |
Adjusting the differential lock, PF 21 | 36 |
Adjusting the hydrostatic transmission cable | ....37 |
Cable holder | 37 |
Adjusting the parking brake | 38 |
Replacing the air filter | 39 |
Replacing the fuel filter | 42 |
Cleaning the pulse air filter | 42 |
Checking the fuel pump’s air filter | 42 |
Checking the tyre pressures | 43 |
Checking the battery acid level | 43 |
Ignition system | 43 |
Fuses | 44 |
Checking the safety system | 45 |
Replacing the light bulbs | 46 |
The cutting unit components | 47 |
Attaching the cutting unit | 47 |
Adjusting the cutting height, |
|
parallelism and ground pressure | 50 |
The cutting unit’s service position | 51 |
Cutting unit model | 52 |
Checking the blades | 52 |
Removing the cutting unit | 53 |
Removing the unit frame | 55 |
Removing the belt | 55 |
Attaching the belt | 56 |
Changing the cutting unit’s belt | 57 |
Removal of BioClip Plug | 58 |
Lubrication | 59 |
Lubrication schedule, PF 18 | 59 |
Lubrication schedule, PF 21 | 60 |
General | 61 |
Lubricating the cables | 61 |
Accessories | 61 |
Lubricating in accordance with |
|
the lubrication schedule | 62 |
1. Pedal mechanism in frame tunnel | 62 |
2. Chains in the frame tunnel | 63 |
3. Differential lock cable, PF 21 | 63 |
4. Engine oil | 64 |
5. Gear lever | 66 |
6. Transmission | 66 |
7. Cutting unit | 66 |
8. Driver’s seat | 66 |
9. Throttle and choke cables, lever bearings | ... 67 |
10. Hydraulic oil filter, change, PF 21 | 68 |
11. Oil filter, change | 68 |
12. Parking Brake Cable | 69 |
13. Transmission oil level | 69 |
Trouble Shooting Guide | 71 |
Storage | 73 |
Winter Storage | 73 |
Service | 74 |
Electrical system | 75 |
Hydraulic system, PF 21 | 77 |
Technical data | 79 |
EU Declaration of Conformity | 81 |
EU Declaration of Conformity |
|
(only applies to Europe) | 81 |
Service journal | 83 |