Husqvarna ProFlex 21 manual English-86

Page 88

SERVICE JOURNAL

Action

Date, mileage reading, stamp,

 

signature

 

 

100/200-Hour Service

 

 

 

1. Change engine oil. Replace the oil filter every 200 hours.

Notes

2.Clean/change the air cleaner’s pre-filter (Oil-foam element).

3.Clean the air cleaner’s paper filter. Replace every 200 hours. (shorter intervals for dusty operating conditions)

4.Clean the engine’s cooling air intake and the transmission’s air intake.

5.Clean the cooling fins on the cylinder and cylinder head.

6.Check/adjust the cutting height.

7.Check/adjust the parking brake.

8.Inspect the flame arrester/spark extinguisher (extra equipment).

9.Clean/replace the spark plugs.

10.Change the inline fuel filter.

11.Replace the hydraulic oil filter every 200 hours.

12.Clean the fuel pump’s air filter.

13.Clean the pulse air filter.

14.Check nuts and screws for tightness.

15.Check whether the oil and filter need to be changed in gearbox K 62 or K66 (every 500 hours).

This field is intended for keeping a journal

English-86

Page 87 Page 89
Image 88
Page 87 Page 89
Contents Rider ProFlex 18 Rider ProFlex Svenska Contents Operator’s Manual for Rider ProFlex 18 and ProFlexImportant Information Introduction IntroductionProper Service Serial NumberExplanation of Symbols Symbols and decalsXxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx Safety instructions Safety InstructionsGeneral use Keep children away from the work area Driving on slopes Do not drive down slopes with the unit raised Do as followsMaintenance ChildrenDo not smoke when carrying out maintenance Transport Presentation PresentationPlacement of Controls Choke Lever Throttle ControlAccelerator Lights and power outlet AccessoriesCutting unit Cutting height adjustment lever Lever for hydraulic lift of attachments, PFLifting the cutting unit transport position Lowering the unit mowing positionTransport position Mechanical lifting lever for cutting unitMowing position Seat Parking brakeFuelling Clutch control Differential lock, PFChronometer Driving Mowing tipsDriving Before StartingStarting the engine Impaired cooling of the engine. Risk of major engine damageDo not run the starter motor for more than Driving the Rider, PF Stopping the engine, PF English-26 English-27 English-28 Maintenance MaintenanceMaintenance schedule = Described in this manual = Not described in this manual English-31 Removing the Rider’s covers Engine coverFront cover Right-hand wing coverChecking the engine’s cooling air intake Left-hand wing coverTransmission cover Cleaning the engine and muffler Checking the transmission air intakeChecking and adjusting the steering cables Checking and adjusting the choke cable Checking and adjusting the throttle cableAdjusting the differential lock, PF Adjusting the hydrostatic transmission cable Cable holderAdjusting the parking brake Poorly adjusted brake can result in reduced braking abilityReplacing the air filter Replacing the air filter, PFEnglish-40 English-41 Replacing the fuel filter Cleaning the pulse air filterChecking the fuel pump’s air filter Checking the battery acid level Checking the tyre pressuresIgnition system Wrong spark plug type can damage the engineFuses Replacing the spark plugChecking the safety system Replacing the light bulbs Attaching the cutting unit Cutting unit componentsExercise caution Risk of crush injuries Watch your fingers. Do not turn the blades or the belt Check that the belt is around the idler Belt Sketch Cutting height ParallelismCutting unit’s service position Placing in the service positionReleasing the service position Ground pressureCutting unit model Checking the bladesRemoving the cutting unit Exercise caution. Risk of crush injuriesPull out the unit so that it catches on the outer hooks Removing the unit frame Removing the beltAttaching the belt Hook the spring to the blade brakeChanging the cutting unit’s belt Removal of BioClip Plug Lubrication LubricationLubrication schedule, PF English-60 General Lubricating the cablesLubricating in accordance with the lubrication schedule Pedal mechanism in frame tunnelChains in the frame tunnel Differential lock cable, PFEngine oil Oil is topped up through the hole the dipstick sitsReplacing the engine oil Transmission Gear leverDriver’s seat Throttle and choke cables, lever bearings Hydraulic oil filter, change, PF Oil filter, changeParking Brake Cable Transmission oil levelEnglish-70 Trouble Shooting Guide Trouble ShootingProblem Cause English-72 Storage StorageWinter Storage Service Electrical and Hydraulic Systems Electrical systemEnglish-76 Hydraulic system, PF English-78 Technical Data Technical dataTransmission Data Rider ProFlex Hydraulic SystemCutting unit Combi EU Declaration of Conformity EU Declaration of ConformityEU Declaration of Conformity only applies to Europe ProFlex 18 01/901/009 ProFlex 21 01/901/010English-82 Service Journal Service journalAction After the First 8 HoursAction Date, mileage reading, stamp Signature Hour Service English-85 English-86 English-87 English-88 Action Date, mileage reading, stamp, signature English-90 Svenska ´z+H6T¶68¨ Svenska 114 02
Top Page Image Contents