Cisco Systems 10200 Checking Disk Mirroring on Each Host Machine

3-5

Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x

OL-16000-07

Chapter 3 Monitoring and Backing Up the BTS

Checking BTS System Health

Checking Disk Mirroring on Each Host Machine

Each procedure takes about 30 minutes.

Before doing this procedure, ensure your BTS platform is connected to controller 1 or controller 0.

Step 1 Log in as root to CA/FS side A using telnet.

Step 2 Enter one of the following:

<hostname># metastat | grep c0

Or:

<hostname># metastat | grep c1

Step 3 Verify the return matches the following:

c1t0d0s1 0 No Okay Yes

c1t1d0s1 0 No Okay Yes

c1t0d0s5 0 No Okay Yes

c1t1d0s5 0 No Okay Yes

c1t0d0s6 0 No Okay Yes

c1t1d0s6 0 No Okay Yes

c1t0d0s0 0 No Okay Yes

c1t1d0s0 0 No Okay Yes

c1t0d0s3 0 No Okay Yes

c1t1d0s3 0 No Okay Yes

c1t1d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ9JG7800007518H8WV

c1t0d0 Yes id1,sd@SSEAGATE_ST373307LSUN72G_3HZ9JC9N00007518Y15K

If the results differ synchronize the disk mirroring:

<hostname># cd /opt/setup

<hostname># sync_mirror

Verify the results using Step 1 through Step 3.

Caution In case of a mismatch, synchronize once. If the mismatch continues, contact Cisco TAC.

Step 1 Log in as root to CA/FS side B using telnet.

Step 2 Enter <hostname># metastat | grep c0.

Step 3 Verify the return matches the following:

c0t0d0s6 0 No Okay

c0t1d0s6 0 No Okay

c0t0d0s1 0 No Okay

c0t1d0s1 0 No Okay

c0t0d0s5 0 No Okay

c0t1d0s5 0 No Okay