Samsung VP-M2100B Adjusting the LCD Monitor, Nastavení LCD monitoru, Jak zaãít, Getting Started, on the CAM, zapnûte kameru, Pfiesunem tlaãítka [ W/T] zvolte, Notes, Poznámky

ENGLISH						CZECH
Getting Started			Jak zaãít
Adjusting the LCD Monitor			Nastavení LCD monitoru
Your CAM is equipped with a colour Liquid Crystal Display monitor,			Va‰e kamera je vybavena displejem s tekut˘mi krystaly, na kterém lze
which enables you to view directly what you are recording or playing			pfiímo prohlíÏet, co zaznamenáváte, nebo pfiehrávat hotov˘ záznam.
back. Depending on the conditions under which you are using the			V závislosti na podmínkách, ve kter˘ch kameru pouÏíváte (napfiíklad
CAM (indoors or outdoors for example), you can adjust the LCD			vnitfiní prostory nebo exteriéry), lze nastavit jas a barvy LCD displeje.
Brightness or Colour.
1. Move [POWER/MODE Selector] down to turn	3			1.	Pohybem ovladaãe [POWER/MODE] dolÛ
		System Settings
on the CAM.			System		zapnûte kameru.

Display

2.Move [POWER/MODE Selector] down to select System Settings and press the [OK] button.

◆The system is automatically converted into the selected mode in two seconds even when the [OK] button is not pressed.

3.Move the [ W/T] button to select <Display> and press the [√] button.

4.Move the [ W/T] button to select <LCD Brightness> or <LCD Colour> and press the [OK] button.

5.Move the [ W/T] button to select desired brightness or colour and press the [OK] button.

◆Refer to pages 90~91 for details.

Date/Time

System

Memory

LanguageEnglish

4 Settings: Display

System

LCD Brightness	20 %
LCD Colour	50 %
Back

5 Settings: Display

System

LCD Brightness	20 %
LCD Colour	60 %
Back

2.Pfiesunem ovladaãe [POWER/MODE] dolÛ zvolte System Settings (Nastavení systému) a stisknûte tlaãítko [OK].

◆Systém se automaticky pfiepne do zvoleného reÏimu za dvû vtefiiny, i kdyÏ nestisknete tlaãítko [OK].

3.Pfiesunem tlaãítka [ W/T] zvolte <Display> (Displej) a stisknûte tlaãítko [ √ ].

4.Pfiesunem tlaãítka [ W/T] zvolte <LCD Brightness> (Jas LCD monitoru) nebo <LCD Colour> (Barva LCD monitoru) a stisknûte tlaãítko [OK].

5.Pfiesunem tlaãítka [ W/T] zvolte poÏadovan˘ jas nebo barvu a stisknûte tlaãítko [OK].

◆Podrobnosti naleznete na stranách 90~91.

Notes

✤If you select [œ ] button in the menu, the previous menu appears.

✤If it is too bright, adjust the LCD Brightness.

28

Poznámky\ ✤KdyÏ vyberete v nabídce tlaãítko [œ ], zobrazí se pfiedchozí nabídka.✤Pokud je displej pfiíli‰ jasn˘, upravte jas displeje.