Manuals
/
Brands
/
Computer Equipment
/
Network Card
/
Schneider Electric
/
Computer Equipment
/
Network Card
Schneider Electric
66074, 66846 user manual
Please, tick the box below to download manual:
Contents
Main
User Manual
Table of Contents
Page
Page
User Manual
1 MGE Network Solution
1.1 Introduction
1.1.1 Connecting the UPS / STS to the Network
1.1.2 Protecting the computers / servers
1.1.3 Monitoring the UPSs over the network
1.1.4 Connection
1.1.4.1 How to connect UPS / network :
1.1.4.2 Setting up the protection, for UPS only
1.2 Presentation of the Network Management Cards (NMC)
1.3 Presentation of the Environment Sensor solution
1.4 Direct sending of E-mail
1.5 Sending text messages (SMS)
1.6 Compatibility with the Network Management Systems (NMS) Trap sending
1.7 Technical data 1.7.1 Configuration
1.7.2 Administration
1.7.3 Network
1.7.4 MIB (Management Information Base)
1.7.5 Environment sensor
Page
User Manual
2 Installation and Configuration
User Manual
3 Supervision / Administration via a Web browser
3.1 Optimising the performance of your browser
3.2 UPS / STS 3.2.1 UPS properties page
3.2.1.1 UPS zone: general information on the UPS.
3.2.1.2 UPS status zone: essential information
3.2.1.3 Battery status zone:
3.2.2 STS properties page
3.2.2.1 STS zone: general information on the STS.
3.2.2.2 STS status zone: essential information
3.2.2.3 Sources status zone:
3.2.3 About
3.2.4 On-line help
Page
3.2.5 UPS 3-Phase display
3.2.5.1 Normal input measurements
3.2.5.2 Battery measurements
3.2.5.3 By Pass measurements
3.2.6 STS 3-Phase display
3.2.6.1 Source 2 input measurement
3.2.6.2 Source 2 input measurement
3.2.7 UPS Control
Page
3.2.8 UPS weekly schedule programming
3.2.9 Shutdown parameters
3.2.10 Viewing the alarms
3.3 Logs 3.3.1 UPS Measurements
3.3.2 STS Measurements
Page
3.3.3 UPS Event log
3.3.4 STS Event log
Page
3.3.5 System log
Page
3.4 Notification 3.4.1 UPS Email Notification
Page
3.4.2 STS Email Notification
3.4.3 Email Message Settings
3.4.3.1 UPS Email Message Settings
3.4.3.2 STS Email Message Settings
3.4.4 Email Example
3.5 Configuration
3.5.1 Network Settings
Page
3.5.2 System
Page
3.5.3 UPS Notified Applications
Page
3.5.4 Central Shutdown Configuration
3.5.5 STS Notified Applications
Page
3.5.6 Access control
Page
Page
3.5.7 Time
3.6 Environment
3.6.1 Characteristics
3.6.2 Environment status
Page
3.6.3 UPS Environment Settings
3.6.3.1 UPS Environment Settings
3.6.3.2 STS Environment Settings
3.6.4 Log
User Manual
4 Servers protection, UPS only
4.1 Set-up of the shutdown parameters
4.1.1 Shutdown criteria managed by the Management Card
4.1.1.1 Backup time before initiating the shutdown procedure (Shutdown After)
4.1.2 Specific set-up for long autonomy installation (> 30 mn)
Page
4.2.2 Extended power outage, shutdown initiated by the Low battery power message
4.2.4 Off/On command
User Manual
5 Configuring a set of cards with Mupgrade
6 Configuration in local mode and via Telnet or SSH
6.1 Configuration in local mode
6.1.1 Choice 1: SNMP agent configuration menu
6.1.2 Choice 2: UPS / STS parameters
6.1.3 Choice 3: Access control
6.1.4 Choice 4: Restore default configuration
6.1.5 Choice 5: Reset the card
6.2 Configuration via Telnet
6.3 Configuration via SSH
6.3.1 PuTTY SSH Client Program
Page
Page
User Manual
7 Maintenance
7.1 Software upgrade 7.1.1 Card firmware upgrade using Mupgrade (Windows)
7.1.2 Card software upgrade via TFTP (UNIX and Windows)
7.1.3 Recovery tool software Msupgrade (Windows) via the serial link
User Manual
8 Appendices
8.1 Tables of alarms and events 8.1.1 UPS Alarm table
8.1.2 STS Alarm table
8.1.3 UPS event table
Page
8.1.4 STS event table
Page
8.1.5 System alarm table
8.2 Glossary