Network
Management Card
User Manual
Select an entry in the list to modify the values in the edit zone at the bottom of the page. Note that the Network Shutdown Module must not be manually modified.
The applications in the table appears in the order they have subscribed to the card. Following informations are displayed :
◗Nr : is the index where the application is stored into the table.
◗Hostname or IP Address : By priority the hostname of the computer is displayed when the IP address can be converted into a hostname with a DNS server or if the application has been entered as a hostname (see page Network Management System settings). Otherwise the IP address is displayed.
◗Application Name : sent by the application at subscribe time or manually entered.
Many actions are available on this page :
◗Remove : Depending on the kind of application, the selected ones will definitively disappear from the table as SNMP applications, or they will disappear and automatically
◗STS general alarm Test : This test simulates alarm 'STS general alarm' , making sure that the applications
can be reached over the network.
◗
Add NMS allows to add a SNMP trap receiver as a Network Management System.
Modify NMS allows to modify a SNMP trap receiver.
Both buttons makes appear a new window where it is possible to enter the Application name, the
Hostname or IP Address, the Trap community and the severity.
Network Management Card – User Manual | 34003676EN/HA | Page 49/81 |
