Installation, Basic configuration | Schneider Electric 66074, 66846

Network

Management Card

User Manual

2 Installation and Configuration

For the following sections, read the installation manual supplied with the card or available for download on the www.apc.com web site in the “Download area” section .

2.1Installation

2.1.1Installing the card in the UPS / STS

2.1.2Connecting the card to the IT network

2.1.3Understanding front panel signals

2.2Basic configuration

2.2.1List of default parameters

2.2.2Adjusting the network parameters

2.2.3Rebooting the card

2.2.4Restoring factory configuration

2.2.5Lost password – restoring the default passwor d

2.2.6Checking that the card is working

2.3Environment Sensor

Read the installation manual supplied with the box.

Network Management Card – User Manual

34003676EN/HA

Page 11/81

Image 11

Schneider Electric 66074, 66846 user manual Installation, Basic configuration, Environment Sensor

Contents

Network Management Card NMC Transverse Environment Sensor Network Management Card Appendices Tables of Alarms and Events ConfigurationConfiguration VIA Telnet Configuration VIA SSH MAINTENANCE72 Software Upgrade Glossary Network Management Card Connecting the UPS / STS to the NetworkIntroduction Network Shutdown module only available for UPS, not for STS MGE supervisor Enterprise Power ManagerProtecting the computers / servers Monitoring the UPSs over the network Presentation of the Network Management Cards NMC How to connect UPS / networkSetting up the protection, for UPS only Connection Sending text messages SMS Presentation of the Environment Sensor solutionDirect sending of E-mail Technical data 10/81 Environment Sensor InstallationBasic configuration Optimising the performance of your browser Supervision / Administration via a Web browser UPS status zone essential information UPS / STSUPS properties UPS zone general information on the UPS Battery status zone STS status zone essential information STS propertiesSTS zone general information on the STS Sources status zone About On-line help 18/81 Normal input measurements UPS 3-Phase display By Pass measurements Battery measurements STS 3-Phase display Source 2 input measurement UPS Control 23/81 UPS weekly schedule programming Important note Shutdown parameters Viewing the alarms UPS Measurements Logs STS Measurements 29/81 STS Event log UPS Event log 31/81 System log 33/81 Notified events NotificationUPS Email Notification Recipient List Mail message configuration see next STS Email Notification Other settings Subject Email Message SettingsUPS Email Message Settings Sender STS Email Message Settings Email Example User Name and password by default are Mgeups Configuration Network Settings 42/81 System 44/81 UPS Notified Applications 46/81 Central Shutdown Configuration STS Notified Applications 49/81 Access control 51/81 Access is disabled and the card is accessible in SSH Time Environment CharacteristicsStatus Configuration Log Environment status 56/81 UPS Environment Settings UPS Environment Settings Humidity STS Environment Settings 4 Log Shutdown criteria managed by the Management Card Set-up of the shutdown parameters Shutdown duration Specific set-up for long autonomy installation 30 mnShutdown when backup time is less than Different server and UPS shutdown sequences 63/81 4 Off/On command Configuration in local mode Configuring a set of cards with Mupgrade Mgeups Choice 1 Snmp agent configuration menu Choice 2 UPS / STS parameters Choice 3 Access control Choice 5 Reset the card Choice 4 Restore default configuration PuTTY SSH Client Program Configuration via TelnetConfiguration via SSH 70/81 71/81 Card software upgrade via Tftp Unix and Windows Software upgradeCard firmware upgrade using Mupgrade Windows English French Tables of alarms and eventsUPS Alarm table STS Alarm table UPS event table UPS STS event table 77/81 System alarm table Glossary Telnet Subnet mask Trap Snmp