System | Schneider Electric 66074, 66846 specs

Network

Management Card

User Manual

3.5.2System

Click the “System” section in the menu.

This menu enables the customisation of the information on the UPS properties / STS properties and Environment pages.

◗UPS contact: This text field is limited to 32 characters. Enter the name of the person responsible for UPS administration at IT network level and/or electrical maintenance. This field does not appear on any other Web page. By default, its value is “Computer Room Manager”.

◗UPS location: Enter a description (limited to 32 characters) of the location of the UPS in your installation (e.g. Computer room E1-C066). This text is displayed on the home page at the top right, above the name of the UPS. Its value by default is “Computer room”.

◗History Log interval: [5 to 99999 seconds]. Measurement save period. Default value = 60 sec.

◗Refresh rate: [5 to 99999 seconds]. Home page and alarms table refresh period. Default value = 10 sec.

◗Default language: Enables initialisation of the browser language at card connection.

Auto: Automatically displays the Web page texts in the same language as your browser. If the Network Management Card is not able to display the recognised language, the pages will be displayed in English.

Network Management Card – User Manual

34003676EN/HA

Page 43/81

Image 43

Schneider Electric 66074, 66846 user manual System

Contents

Network Management Card NMC Transverse Environment Sensor Network Management Card Appendices Tables of Alarms and Events ConfigurationConfiguration VIA Telnet Configuration VIA SSH MAINTENANCE72 Software Upgrade Glossary Introduction Connecting the UPS / STS to the NetworkNetwork Management Card Network Shutdown module only available for UPS, not for STS MGE supervisor Enterprise Power ManagerProtecting the computers / servers Monitoring the UPSs over the network Presentation of the Network Management Cards NMC How to connect UPS / networkSetting up the protection, for UPS only Connection Direct sending of E-mail Presentation of the Environment Sensor solutionSending text messages SMS Technical data 10/81 Basic configuration InstallationEnvironment Sensor Optimising the performance of your browser Supervision / Administration via a Web browser UPS status zone essential information UPS / STSUPS properties UPS zone general information on the UPS Battery status zone STS zone general information on the STS STS propertiesSTS status zone essential information Sources status zone About On-line help 18/81 Normal input measurements UPS 3-Phase display By Pass measurements Battery measurements STS 3-Phase display Source 2 input measurement UPS Control 23/81 UPS weekly schedule programming Important note Shutdown parameters Viewing the alarms UPS Measurements Logs STS Measurements 29/81 STS Event log UPS Event log 31/81 System log 33/81 UPS Email Notification NotificationNotified events Recipient List Mail message configuration see next STS Email Notification Other settings Subject Email Message SettingsUPS Email Message Settings Sender STS Email Message Settings Email Example User Name and password by default are Mgeups Configuration Network Settings 42/81 System 44/81 UPS Notified Applications 46/81 Central Shutdown Configuration STS Notified Applications 49/81 Access control 51/81 Access is disabled and the card is accessible in SSH Time Status Configuration Log CharacteristicsEnvironment Environment status 56/81 UPS Environment Settings UPS Environment Settings Humidity STS Environment Settings 4 Log Shutdown criteria managed by the Management Card Set-up of the shutdown parameters Shutdown when backup time is less than Specific set-up for long autonomy installation 30 mnShutdown duration Different server and UPS shutdown sequences 63/81 4 Off/On command Configuration in local mode Configuring a set of cards with Mupgrade Mgeups Choice 1 Snmp agent configuration menu Choice 2 UPS / STS parameters Choice 3 Access control Choice 5 Reset the card Choice 4 Restore default configuration Configuration via SSH Configuration via TelnetPuTTY SSH Client Program 70/81 71/81 Card firmware upgrade using Mupgrade Windows Software upgradeCard software upgrade via Tftp Unix and Windows English French Tables of alarms and eventsUPS Alarm table STS Alarm table UPS event table UPS STS event table 77/81 System alarm table Glossary Telnet Subnet mask Trap Snmp