Schneider Electric 66074, 66846 user manual UPS Email Message Settings, Sender, Subject

Network

Management Card

User Manual

3.4.3 Email Message Settings

This page enables customisation of the content of the messages received by recipients of e-mails sent by the card.

Customisation is common to the four recipients that can be notified (see E-mail notification).

3.4.3.1 UPS Email Message Settings

◗Sender

(32 characters maximum) identifies the source of the message. The default value is ups@domain.com. This field is free. However, depending on the type of SMTP server configuration, it is possible that the server checks that the domain name contained in the From address exists, and even that the user in the From address belongs to this domain.

◗Subject

enables the user to specify the subject of the e-mail to be sent. By entering some free text and selecting from several optional fields, if desired, the message subject is built:

-UPS / STS name recalls the name of the UPS, can be selected or not.

–UPS / STS location recalls the geographic location of the UPS (see System Settings), can be selected or not.

–Event message identifies the event generating the e-mail, can be selected or not.

Network Management Card – User Manual 34003676EN/HA Page 37/81