Network
Management Card
User Manual
“Communication” : indicates the status of the communication between the card and the STS
“Output” : indicates whether the output is or not powered
“Output load level” : indicates the power percentage used at STS output
“Transfer” : indicates if it is possible to switch from one used source to the other.
3.2.2.3 “Sources status” zone:
◗“Active source” : indicate which source is currently used. Possible values are:
-1: for source 1
-2 : for source 2
–Unknow : if value unknown (intialization, lost of communication)
◗“Prefered source”: indicate which source is used, if none source is faulty Possible values are:
- 1: for source 1
- 2 : for source 2
–Unknow : if value unknown (intialization, lost of communication)
3.2.3 About
The “About your UPS” or “ About your STS” zone provides information on the UPS / STS, in particular, the name range and software version. Are also available, the current NMC firmware release.
Network Management Card – User Manual | 34003676EN/HA | Page 16/81 |
