Network
Management Card
User Manual
◗Change Community
◗Current Community Read/Write is: Enables read and write SNMP access control (GET and SET). Default value “public”.
◗Change Community Read/Write: Text field limited to 31 characters. This field is only validated after clicking on “Save” . Default value “public”.
◗Change Trap Port Number: Numeric field limited to 65534. Enables forwarding of traps sent by the card to a port other than the port usually used for SNMP. Default value 162.
◗SSL Activation: When selected, access to Web interface is made in secure mode (https). Telnet
access is disabled and the card is accessible in SSH.
Connections with Network Shutdown Modules stay in standard mode (secure TCP)
SSL Security Implementation
SSL | version 3.0 |
Method | TLS_RSA_WITH_RC4_128_MD5 |
Auth | RSA |
Key Exchange | RSA |
Encryption | RC4_128 |
Digest | MD5 |
SSH Security Implementation | |
SSH v1 |
|
Method | ==> SSH_CIPHER_3DES |
Encryption | ==> Triple_DES in CBC mode |
This change takes effect after a card reboot.
◗Authentication for all html pages : Login/password Authentication is required for all pages.
Network Management Card – User Manual | 34003676EN/HA | Page 52/81 |
