INSTALLING NETWARE

3 DOS CLIENTS

AUTOMATICALLY

The 3Com AutoLink software utility automatically configures one 3C319 NIC and installs the DOS 16-bit ODI client network driver for NetWare 3.12 and 4.10 systems. This chapter describes running the AutoLink program. Disregard this chapter if you do not want to install the DOS 16-bit client driver for NetWare.

AutoLink Software Functions

AutoLink software configures your PC as a NetWare DOS ODI client. The AutoLink configuration program performs the following functions:

Configures a single 3C319 NIC.

The AutoLink configuration utility cannot be used to configure multiple 3C319 NICs.

Installs the NetWare client software from TokenDisk diskette #1.

Modifies the CONFIG.SYS, AUTOEXEC.BAT, and NET.CFG files. (The previous versions of these files are renamed CONFIG.3CM, AUTOEXEC.3CM, and NET.3CM.)

The AutoLink configuration utility is a DOS application. It cannot run in PCs running OS/2, Windows 95, or Windows NT.

Page 29
Image 29
3Com 3C319 manual Installing Netware DOS Clients Automatically, AutoLink Software Functions