6-2 CHAPTER 6: INSTALLING A NETWORK DRIVER FOR WINDOWS NT
Before Installing the Driver
Before installing the driver, make sure that Windows NT
is installed and that the following procedures have
been completed:
■The 3C319 NIC has been installed as described in
Chapter 2.
■Plug and Play (PnP) has been manually disabled
as described in Chapter 5, “Configuring the
NIC Manually.”
Windows NT versions 3.51 and 4.0 are not PnP-enabled.
■The NIC has been manually configured as described
in Chapter 5, “Configuring the NIC Manually.”
If your network environment uses the TCP/IP
communications protocol, you must obtain from
your network administrator all the information you
will need to define an IP address during the
installation process.
Installing the NDIS 4 Driver for Windows NT
This section describes installing the 3C319 NIC NDIS 4
driver for the following Microsoft Windows NT versions:
■Windows NT 3.51
■Windows NT 4.0

Windows NT 3.51

Follow these steps to install the NDIS 4 driver for
Windows NT 3.51:
1 Insert TokenDisk diskette #2 in the floppy drive.
2 In the Main group, double-click the Control
Panel icon.
3 In the Control Panel group, double-click the
Network icon.
4 In the Network Settings dialog box, click
Add Adapter.