3Com 3C319 manual Select the protocol that the application uses

7-4CHAPTER 7: CONFIGURING DYNAMICACCESS CLASS OF SERVICE

Figure 7-2Initial Class of Service Additional Ranges Screen

2Enter the beginning of the port or socket range for the application in the Range Start box.

The range start should be a hexadecimal value with a maximum of four digits.

3Enter the inclusive range end value of the port or socket range for the application in the Range End box.

The range end should be a hexadecimal number with a maximum of four digits. If only one port or socket is needed, Range End should match Range Start.

4Select the protocol that the application uses.

This can be TCP, UDP, or IPX. Some applications support multiple protocols and have port or socket ranges for each protocol. In this case, the range or protocol must match the protocol on the PC.