8-10CHAPTER 8: MANUALLY INSTALLING MISCELLANEOUS NETWORK DRIVERS

10Type H to boot your PC from your local hard disk. Otherwise, the PC will boot from the network server.

Disabling RPL

To disable RPL, use the following procedure:

1Boot your PC under DOS.

2Insert the backup copy of TokenDisk diskette #1 in a floppy drive.

3At the prompt, type:

3trdiag [Enter]

4From the Install pull-down menu, select Configure NIC.

5Using the arrow keys, select Boot PROM.

6Press [Enter], and select Disable.

7Press [Enter].

8Select OK and press [Enter] to save the setting.

9Remove the diskette from the drive and reboot the PC.

Page 78
Image 78
3Com 3C319 manual Disabling RPL