3Com 3C319 manual Adding Class of Service Ranges and Protocols, Click the Additional Ranges tab

Adding Class of Service Ranges and Protocols 7-3

3Click the boxes next to the appropriate application names for which you want to activate Class of Service.

For the NDIS 4 driver to recognize high-priority network traffic, it must know if a stream of network traffic was generated by a given application.

If an application is not listed here, you can obtain the necessary information from the application’s manufacturer and manually enter the information in the Additional Ranges tab.

4Click OK.

Adding Class of Service Ranges and Protocols

You can add information for Class of Service applications that you want to prioritize but which are not listed on the 3Com Class of Service Setup screen (Figure 7-1).

You must specify port or socket ranges as well as the network protocol being used. Obtain the information from the application manufacturer. The Class of Service network driver uses these ranges to determine whether a packet should be treated as high-priority.

To add the Class of Service ranges and protocols, follow these steps:

1Click the Additional Ranges tab.

The Class of Service Additional Ranges screen appears,

as shown in Figure 7-2.

c