7-10CHAPTER 7: CONFIGURING DYNAMICACCESS CLASS OF SERVICE

Using Windows NT to Access Auto Ring Speed Detection

To access the auto ring speed detection option and

DynamicAccess Class of Service applications in a

Windows NT environment, follow these steps:

1In the My Computer group, double-click the Control Panel icon.

2In the Control Panel group, double-click the Network icon.

3In the Network dialog box, click the Adapters tab.

4In the Adapters tab, select 3Com TokenLink Velocity ISA (3C319) Adapter and click Properties.

The 3Com TokenLink Velocity ISA (3C319) Adapter dialog box appears, as shown in Figure 7-5.

The 3Com TokenLink Velocity ISA (3C319) Adapter dialog box provides you with an alternative method of accessing DynamicAccess Class of Service. To access the 3Com Class of Service Setup screen (shown in Figure 7-1), click the Priority button.

Disabling Auto Ring Speed Detection

The 3Com TokenLink Velocity ISA (3C319) Adapter dialog box (Figure 7-5) lets you disable or enable auto ring speed detection.

Auto ring speed detection is automatically enabled when you load the NDIS 4 driver. When enabled, the Auto Ring Speed Detect option is checked. To disable the option follow these steps:

1In the 3Com TokenLink Velocity ISA (3C319) Adapter dialog box (Figure 7-5), click the marked Auto Ring Speed Detect check box to clear it.

The check box toggles between enabled (checked) and disabled (cleared).

2Click OK.

Page 66
Image 66
3Com 3C319 manual Using Windows NT to Access Auto Ring Speed Detection, Disabling Auto Ring Speed Detection