5-6CHAPTER 5: CONFIGURING THE NIC MANUALLY

6If you want to change other configuration option settings, use the arrow keys to select a setting and press [Enter].

You can use a mouse, provided a mouse driver is installed on your PC. In this case, click the setting you want.

7Continue this procedure to select other options.

8Press [Tab] until you highlight OK.

9Press [Enter].

This procedure saves the new settings to the NIC.

After manually configuring the 3C319 NIC, you must install network drivers. If you have disabled PnP and manually configured the NIC for your Windows 95 environment, go to Chapter 4, “Installing a Network Driver for Windows 95.” For Windows NT environments, go to Chapter 6, “Installing a Network Driver for Windows NT.” For information on manually installing drivers for other operating systems, see Chapter 8, “Manually Installing Miscellaneous Network Drivers.”

Changing the Configuration of Multiple NICs

If you have more than one 3C319 NIC in a PC, you must configure each one separately. Go to the main window of the Configuration and Diagnostic Program, press [F10], and select the next NIC. Repeat steps 4 through 9 in the section “Changing Configuration Option Settings.”

Configuration Options

This section discusses the configuration options for the 3C319 NIC. For instructions on changing any of these options, see the section “Changing Configuration Option Settings” earlier in this chapter. The following configuration options are available:

Plug and Play (PnP)

Configuration Mode

Ring Speed

Page 46
Image 46
3Com 3C319 manual Changing the Configuration of Multiple NICs, Configuration Options