5In the Select Network Adapter dialog box, click Have Disk.
The Insert Disk dialog box appears.
6Insert TokenDisk diskette #2 in the floppy drive.
7Type the following path and click OK: a:\
This path identifies the location of the NDIS 4 OEMSETUP.INF file for Windows NT 4.0.
The Select OEM Option dialog box appears.
8Select 3Com TokenLink Velocity ISA (3C319) Adapter and click OK.
9Verify that 3Com TokenLink Velocity ISA (3C319) Adapter appears in the list in the Network Adapters tab and click Close.
If your network environment uses the TCP/IP communications protocol, the Microsoft TCP/IP Properties dialog box will be displayed. You must obtain from your network administrator all the information you need to define an IP address during the installation process. Continue once you have defined the NIC to TCP/IP.
Bindings messages appear, followed by a prompt to restart the computer.
10Remove TokenDisk diskette #2 from the floppy drive.
11Click Yes to restart the computer.
This concludes the procedure for installing the NDIS 4 driver for Windows NT 4.0.
Auto ring speed detection is automatically enabled when you install the NDIS 4 driver for Windows NT. If you want to disable auto ring speed detection, see “Auto Ring Speed Detection” in Chapter 7.
The DynamicAccess Class of Service feature is disabled by default when you install the NDIS 4 driver for Windows NT. To activate Class of Service, see Chapter 7, “Configuring DynamicAccess Class of Service.”
