4-6CHAPTER 4: INSTALLING A NETWORK DRIVER FOR WINDOWS 95

14Remove TokenDisk diskette #2 from the floppy drive.

15Click Yes to restart your PC to activate the driver.

This concludes the procedure for installing the NDIS 4 driver for retail Windows 95 without PnP support.

Auto ring speed detection is automatically enabled when you install the NDIS 4 driver for Windows 95. If you want to disable auto ring speed detection, see “Auto Ring Speed Detection” in Chapter 7.

The DynamicAccess Class of Service feature is disabled by default when you install the NDIS 4 driver for Windows 95. To activate Class of Service, see Chapter 7, “Configuring DynamicAccess Class of Service.”

Installing the NDIS 4 Driver for Windows 95 OSR2

Follow these steps to install the driver for Windows 95 OEM Service Release 2 (OSR2) version 950b. It is assumed that you are already running Windows 95.

During installation, have the Windows 95 software accessible on diskettes, CD, or hard drive in case the installation utility requests files from the Windows 95 software library.

1Install the 3C319 NIC and start the computer.

Windows 95 detects the new hardware. ISA Token Ring Controller appears in the New Hardware Found dialog notice. The Update Device Driver Wizard dialog

box appears.

2Click Next.

3Click Other Locations.

The Select Other Locations dialog box appears.

4Insert TokenDisk diskette #2 in the floppy drive.

5Type the following path and click OK:

a:\

Page 37 Page 39
Page 38
Image 38
3Com manual Installing the Ndis 4 Driver for Windows 95 OSR2, Install the 3C319 NIC and start the computer, Click Next
Page 37 Page 39
Top Page Image Contents