3Com 3C319 manual Plug and Play PnP, Configuration Mode

Configuration Options 5-7

■I/O Base Address

■BIOS/MMIO Address Location

■Shared RAM Page Size and Address Range

■Interrupt Request Level

■Memory Mode

■I/O Mode

■IRQ Driver Type

■AutoSwitch

■Boot PROM

■Zero Wait State

Plug and Play (PnP)

This option enables a PC with Plug and Play (PnP) support to allocate resources for the 3C319 NIC. The resources allocated in a PnP system include:

■I/O base address

■Interrupt request level

■BIOS/MMIO base address

■Shared RAM base address

The default for PnP is enabled. Disable PnP to configure the 3C319 NIC with the Configuration and Diagnostic Program. For instructions, see the section “Changing Configuration Option Settings” earlier in this chapter.

Configuration Mode

This 3C319 NIC provides the following two modes of operation:

■3Com mode

■IBM mode