3Com 3CRWE554G72 manual Dynamic IP Address Mode, Hostname Screen

Accessing the Wizard 35

Dynamic IP Address Mode

To setup the Gateway for use with a dynamic IP address connection:

1Select the ISP provides configuration dynamically (via DHCP) and then click Next. See Figure 16.

Figure 18 Hostname Screen

2Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box (Figure 18) and click Next. The Clone MAC Address screen displays.

Figure 19 Clone MAC Address Screen

3If your ISP requires an assigned MAC address, select Yes, I would like to enter a MAC address manually and enter the values for a MAC address if required (Figure 19). If the computer you are now using is the one that was previously connected directly to the cable modem, choose Yes, please clone the MAC address from the PC I’m currently using.