36CHAPTER 4: RUNNING THE SETUP WIZARD

Static IP Mode

To setup the Gateway for use with a static IP address connection, use the following procedure:

1Select ISP has provided a static IP address, (see Figure 16) and then click Next. Figure 20 displays.

Figure 20 Static IP Mode Screen

2Enter your IP Address in the IP Address text box.

3Enter your subnet mask in the Subnet Mask text box.

4Enter your ISP gateway address in the Internet (ISP) Gateway Address text box.

5Enter your primary DNS address in the Primary DNS Address text box.

6Enter your secondary DNS address in the Secondary DNS Address text box.

This step is optional. Not all ISPs require a secondary DNS address.

7Check all of your settings, and then click Next.

Page 36
Image 36
3Com 3CRWE554G72 manual Static IP Mode Screen