106 CHAPTER 6: VLAN OPERATION
Displaying and
Debugging of Voice
VLAN
After completing the above configuration, enter the display command in any view
to view the configuration and running state of Voice VLAN.
Voice V LAN
Configuration Example
Networking Requirements
Create VLAN 2 as the Voice VLAN in manual mode and enable its security mode. It is
required to set the aging time to 100 minutes, the OUI address to 0011-2200-0000,
and configure the port Ethernet1/0/2 as the IP Phone access port. The type of IP
Phone is untagged.
Network Diagram
Figure25 Voice VLAN Configuration
Configuration Steps
[SW5500]vlan 2
[SW5500-vlan2]port ethernet1/0/2
[SW5500-vlan2]interface ethernet1/0/2
[SW5500-Ethernet1/0/2]voice vlan enable
[SW5500 -Ethernet1/0/2]quit
[SW5500]undo voice vlan mode auto
[SW5500]voice vlan mac_address 0011-2200-0000 mask ffff-ff00-0000
description private
[SW5500]voice vlan 2 enable
[SW5500]voice vlan aging 100
Table97 Displaying Voice VLAN
Operation Command
Display the status of Voice VLAN display voice vlan status
Display the OUI address supported by the current system display voice vlan oui