516 CHAPTER 22: FILE SYSTEM MANAGEMENT
[SW5500-luser-client002]service-type ssh
4Specify AAA authentication on the user interface.
[SW5500]user-interface vty 0 4
[SW5500-ui-vty0-4]authentication-mode scheme
5Select SSH protocol on the Switch.
[SW5500-ui-vty0-4]protocol inbound ssh
6Specify RSA authentication on the Switch.
[SW5500]ssh user client002 authentication-type RSA
7Configure RSA key pair on the Switch.
If you followed the procedure for generating and executing a ".bat" file containing
keys then you need not perform this step.
[SW5500]rsa peer-public-key switch002
[SW5500-rsa-public]public-key-code begin
[SW5500-key-code]308186028180739A291ABDA704F5D93DC8FDF84C427463
[SW5500-key-code]1991C164B0DF178C55FA833591C7D47D5381D09CE82913
[SW5500-key-code]D7EDF9C08511D83CA4ED2B30B809808EB0D1F52D045DE4
[SW5500-key-code]0861B74A0E135523CCD74CAC61F8E58C452B2F3F2DA0DC
[SW5500-key-code]C48E3306367FE187BDD944018B3B69F3CBB0A573202C16
[SW5500-key-code]BB2FC1ACF3EC8F828D55A36F1CDDC4BB45504F020125
[SW5500-key-code]public-key-code end
[SW5500-rsa-public]peer-public-key end
[SW5500]ssh user client002 assign rsa-key key002
You need to specify RSA private key which corresponds to the public key for the SSH
user client002.
Run SSH1.5 client program on the PC that has been configured with private RSA
private key and you can set up SSH connection.
File System
Configuration
This section contains configuration information for the File System.
Introduction to File
System
The Ethernet switch provides the file system module for your convenience to manage
the storage devices such as flash memory. The file system provides you with the
functions to access and manage the files and directories.
In an Ethernet switch supporting expandable resilient networking (XRN), you can
input a path/file name in one of the following forms:
Beginning with unit[No.]>flash:/, where, [No.] is the unit ID of a switch. This form
indicates the path/file is on the specified unit. For example, the unit ID of a switch is 1,
the URL of the text.txt file in the root directory on the switch must be
unit1>flash:/text.txt.
Beginning with flash:/. This form indicates the path/file is in the flash memory of the
local unit.
Direct path/file name. This form indicates the path/file is under the current working
path.