QoS Configuration 363
Configure Traffic Mirroring
1Configure monitor port
Perform the following configuration in the Ethernet Port View.
Table375 Configure Monitor Port
Only one monitor port can be configured on one Switch. If a group of Switches form
a Fabric, only one monitor port can be configured on one Fabric.
2Configure traffic mirroring
Perform the following configuration in the Ethernet Port View.
Table376 Configuring Traffic Mirroring
Delete Traffic Mirroring
1Delete traffic mirroring
Perform the following configuration in the Ethernet Port View.
Table377 Delete Traffic Mirroring
2Delete monitor port.
Perform the following configuration in the Ethernet Port View.
Table378 Delete Monitor Port
For details about the command, refer to the Command Manual.
Setting Queue Scheduling
Queue scheduling is commonly used to resolve the problem that multiple messages
compete for resource when the network congestion happens. The queue scheduling
function puts the packet to the output queue of the port according to the 802.1p
priority of the packet. The mapping relationship between 802.1p priority and output
queue of the port is as shown in Table379.
Table379 Mapping between 802.1p Priority Levels and Outbound Queues
Operation Command
Configure a monitor port. monitor-port
Operation Command
Configure traffic mirroring mirrored-to { inbound | outbound } { user-group
acl_number [ rule rule ] | ip-group acl_number [
rule rule [ link-group acl_number rule rule ] ] |
link-group acl_number [ rule rule ] } { cpu |
monitor-interface }
Operation Command
Cancel the
configuration of traffic
mirroring
undo mirrored-to { user-group acl_number | acl_name [
rule rule ] | { ip-group { acl_number | acl_name } [
rule rule ] | link-group { acl_number | acl_name } [
rule rule ] }* }
Operation Command
Delete monitor port undo monitor
802.1p priority level Queues
0 2
1 0
2 1
3 3
4 4