Management Device Configuration 607
Configuring a cluster AutomaticallyConfiguringInternal-ExternalInteractionNM Interface for ClusterManagement
Configuration
Configuration Preparation
■The cluster switches are properly connected.
■The internal server is properly connected with the management switch.
Configuration Procedure
Configure VLAN check
on the management
device for the
communication inside
a cluster
port-tagged management-vlan Optional
Exit system view quit —

Table662 Configure a cluster automatically

Operation Command Remark
Enter system view system-view —
Configure a cluster
automatically
auto-build [ recover ] Required
This is to set up a cluster based on
your instructions.

Table661 Configure cluster parameters manually (continued)

Operation Command Remark

Table663 Configure internal-external interaction

Operation Command Description
Enter system view system-view —
Enter cluster view cluster Required
Configure an FTP server for
the cluster
ftp-server ip-address Optional
Configure a TFTP server for
the cluster
tftp-server ip-address Optional
Configure a log host for the
cluster
logging-host ip-address Optional
Configure an SNMP host for
the cluster
snmp-host ip-address Optional

Table664 Configuration procedure

Step Command Description
Enter system view system-view
Enter cluster view cluster Required
Configure the NM interface nm-interface Vlan-interface
vlan_id
vlan_id: VLAN ID
Display information about
current configuration
display
current-configuration
You can execute this command in
any view.