3PORT OPERATION
This chapter covers the following topics:
■Ethernet Port Configuration Introduction
■Link Aggregation Configuration
■Global Broadcast Suppression Feature
■Configuring VCT
■Global Broadcast Suppression Feature
■Displaying Port Configuration Information in Brief
■Displaying Information About a Specified Optical Port
Ethernet Port
Configuration
Introduction
The following features are found in the Ethernet ports of the Switch 5500
■10/100BASE-T Ethernet ports support MDI/MDI-X auto-sensing. They can operate
in half-duplex, full-duplex and auto-negotiation modes. They can negotiate with
other network devices to determine the operating mode and speed. Thus the
appropriate operating mode and speed is automatically configured and the system
configuration and management is greatly streamlined.
■Gigabit SFP ports operate in 1000Mbps full duplex mode. The duplex mode can be
set to full (full-duplex) and auto (auto-negotiation) and its speed can be set to
1000 (1000Mbps) and auto (auto-negotiation).
Ethernet Port
Configuration
Ethernet port configuration is described in the following sections:
■Entering Ethernet Port View
■Enabling/Disabling an Ethernet Port
■Setting the Description Character String for the Ethernet Port
■Setting the Duplex Attribute of the Ethernet Port
■Setting Speed on the Ethernet Port
■Setting the Cable Type for the Ethernet Port
■Enabling/Disabling Flow Control for the Ethernet Port
■Permitting/Forbidding Jumbo Frames to Pass through an Ethernet Port
■Setting the Ethernet Port Suppression Ratio
■Setting the Link Type for an Ethernet Port
■Adding an Ethernet Port to Specified VLANs
■Setting the Default VLAN ID for the Ethernet Port
■Setting Loopback Detection for an Ethernet Port
■Configuring VCT
■VCT Configuration Example
■Copying Port Configuration to Other Ports