458 CHAPTER 22: FILE SYSTEM MANAGEMENT
Networking Diagram
Figure120 Networking for FTP Configuration
Configuration Procedure
1Configure FTP server parameters on the PC. Define a user named as Switch,
password hello, read and write authority over the Switch directory on the PC.
2Configure the Switch
The Switch has been configured with a Telnet user named as user, as 3-level user,
with password hello, requiring username and password authentication.
Use the telnet command to log into the Switch.
<SW5500>
If the flash memory of the Switch is not enough, you need to first delete the existing
programs in the flash memory and then upload the new ones.
3Type in the correct command in User View to establish FTP connection, then enter the
correct username and password to log into the FTP server.
<SW5500> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
4Enter the authorized directory of the FTP server.
[ftp]cd switch
5Use the get command to download the switch.app from the FTP server to the flash
directory on the FTP server.
[ftp]get switch.app
[ftp]get boot.app
6Use the quit command to release the FTP connection and return to User View.
[ftp]quit
<SW5500>
7Upgrade BootROM.
<SW5500> boot bootrom boot.app
This will update BootRom file on unit 1. Continue? [Y/N]y
Upgrading BOOTROM, please wait...
Upgrade BOOTROM succeeded!
Swit ch PC
Netwo rk
Swit chSwit ch PC
Netwo rk