3Com 900-0208 manual Using a Headset

72CHAPTER 5: PERSONALIZING YOUR TELEPHONE

	When you use Class of Service (CoS) Override, any reports that are
	generated on the NBX system indicate that the CoS features of your own
	3Com Telephone were applied temporarily to the telephone on which
	you made the call.
Using a Headset	You can use a headset that has a microphone with any telephone on an
	NBX system.
	■ For how to connect and use a headset with the 3Com Manager’s
	Telephone and 3102 Business Telephone, read the next section.
With the 3Com	The 3Com Manager’s Telephone and 3Com 3102 Business Telephone
Manager’s Telephone	have a headset jack located on the underside of the telephone on the left
and 3Com 3102	side.
Business Telephone	To prepare the headset for all calls on the 3Com Manager’s Telephone
	and 3102 Business Telephone:

1Plug the headset connector into the headset jack on the underside of the telephone. See Figure 10 in Appendix A for the location of the jack.

2Press the Headset button. By default on the 3Com Manager’s Telephone, this is the top Access button.

3Verify that the indicator light beside the Headset button turns on.

To answer a call when you are using the headset:

1Put the headset on. When a call comes in, press the System Appearance button beside the flashing light. You are connected to the call.

The handset can be either on hook or off hook.

2To end a call when you are using the headset, press the Release button on the telephone.

■If the handset is off hook, press the System Appearance button beside the flashing light.

■On a 3Com Business Telephone or 3Com Manager’s Telephone, press the Release button, depress the hook switch, or hang up the handset.