Chapter 1 Siemens 9751 9006i DTMF Integration
Programming the Phone System
Table
Parameter | Required Setting |
|
|
HTLNIDX | (leave field blank) |
|
|
DEVFUNC | ANATE |
|
|
MSGWLMP | N |
|
|
SPECL | (leave field blank) |
|
|
DIAL | DTMF |
|
|
DLIDX | (leave field blank) |
|
|
INS | Y |
|
|
SPDC1 | (leave field blank) |
|
|
SPDC2 | (leave field blank) |
|
|
SPDI | (leave field blank) |
|
|
LCROSD1 | (leave field blank) |
|
|
LCROSD2 | (leave field blank) |
|
|
LCRCOSV1 | (leave field blank) |
|
|
LCRCOSV2 | (leave field blank) |
|
|
FAXSERV | (leave field blank) |
|
|
DTS | N |
|
|
AVD | N |
|
|
CDIDX | (leave field blank) |
|
|
All MWIs on subscriber extensions are turned off when the phone system restarts. To reset MWIs, run the phone system
If you use the broken dial tone for MWIs, subscribers can confuse the MWIs with the stutter dial tone that the phone system uses for another purpose.
Step 5 Repeat Step 4 for each remaining SLMA voice messaging port that sets MWIs.
Step 6 Use the ADDHUNT command to create a hunt group for the answering voice messaging ports. All subscriber phones will use this hunt group to reach Cisco Unity. The hunt group must have the following parameters while the remaining parameters keep their default values.
|
| Siemens 9751 9006i DTMF Integration Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|
