Parameter Required Setting | Able Planet OL-1747-02 specification

Chapter 1 Siemens 9751 9006i DTMF Integration

Programming the Phone System

To program the phone system for analog ports

Step 1 Use the ADDDPLN command to create an extension for each voice messaging port and for the hunt group pilot number. Each extension must have the following parameters set while the remaining parameters keep their default values.

Table 1-1 ADDDPLN Parameter Settings

Parameter	Required Setting

DGTS	• <first extension>&&<last extension> (for voice
	messaging port numbers)
	• <hunt group pilot number>

DPLN	0

CPS	(leave field blank)

DAR	• STN (for voice messaging port numbers)
	• HUNT (for hunt group pilot number)

CHECK	N

Step 2 Use the ADDSCSU command to create the first SLMA voice messaging port that answers calls. Each voice messaging port answering calls must have the following parameters while the remaining parameters keep their default values.

Table 1-2 ADDSCSU Parameter Settings for Answering Ports

		Parameter	Required Setting

		STNO	<the extension number>

		PEN	<the port equipment number>

		DPLN	0

		ITR	0

		COS1	<a standard class of service>

		COS2	<a standard class of service>

		COSX	(leave field blank)

		PUBSCR	<the PSTN prefix plus the extension number>

			Siemens 9751 9006i DTMF Integration Guide
			Siemens 9751 9006i DTMF Integration Guide
	OL-1747-02				1-5
	OL-1747-02				1-5

Image 17

Able Planet OL-1747-02 manual To program the phone system for analog ports, Parameter Required Setting

Contents

Siemens 9751 9006i Dtmf Integration Guide Siemens 9751 9006i Dtmf Integration Guide Preface Exiting the Cisco Unity Software A-1 Audience Purpose Convention Description OrganizationConventions Document Location Cisco Unity Documentation Viii World Wide Web Obtaining DocumentationDocumentation CD-ROM Ordering Documentation Cisco.com Obtaining Technical AssistanceDocumentation Feedback Technical Assistance Center Contacting TAC by Using the Cisco TAC Website Contacting TAC by Telephone Integration Steps Integration Overview Phone System Requirements Cisco Unity Server Integration Description Programming the Phone System Integration Features To program the phone system for analog ports Parameter Required Setting Nytpe NAT Actcde Devfunc Anate Msgwlmp Specl Type VCE FPN Parameter Transfer Type Usage Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled To enter port settings Switch Parameter Required Setting To set up the test configuration Testing the Integration To test an external call with release transfer To test an internal call with release transfer To test supervised transfer To set up supervised transfer on Cisco Unity To return Example Subscriber to the default settings Dual Phone System Integration Overview Integration Steps When No Phone Systems Are Installed Siemens 9751 9006i Dtmf Integration Guide Changing Cisco Unity Administrator Settings To specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManager Siemens 9751 9006i Dtmf Integration Guide OL-1747-02 Changing the Number of Installed Ports To remove the existing AV-Cisco TSP To reinstall the AV-Cisco service provider OL-1747-02 To exit the Cisco Unity software from another computer Exiting the Cisco Unity Software To shut down or restart the Cisco Unity server Starting the Cisco Unity Software Click Start Cisco Unity To start the Cisco Unity software from another computer Setting Up Cisco Unity to Remap Extension Numbers Remapping Extension Numbers Remapping Feature To remap extension numbers Wildcard Result Syntax and Examples Rule Original Number New Number Phone System Integration Click OK To set the Port assignments in the Registry OL-1747-02 OL-1747-02