Chapter 1 Siemens 9751 9006i DTMF Integration
Testing the Integration
Step 8 On the Status Monitor, confirm that the state of the port handling the call changes to “Idle.” This state means that the port was successfully released when the call ended.
To return Example Subscriber to the default settings
Step 1 In the Cisco Unity Administrator, go to Subscribers > Subscribers > Call Transfer.
If Example Subscriber is not displayed, click the Find icon (the magnifying glass) in the title bar, then click Find, and select Example Subscriber in the list that appears.
Step 2 Under Transfer Incoming Calls, click No (Send Directly to Subscriber’s Greeting).
Step 3 In the navigation bar, click Profile to go to Subscribers > Subscribers > Profile. Step 4 In the Extension field, enter 99990.
Step 5 Click the Save icon.
Step 6 In the navigation bar, click Messages to go to Subscribers > Subscribers > Messages for Example Subscriber.
Step 7 Under Message Waiting Indicators (MWIs), uncheck Use MWI for Message Notification.
Step 8 Click the Save icon.
| Siemens 9751 9006i DTMF Integration Guide |
