Able Planet OL-1747-02 Go to System > Switch > IP Switch, Go to System > Ports, Switch Parameter

Chapter 2 Dual Phone System Integration

Changing Cisco Unity Administrator Settings

Step 3	Adjust other settings as appropriate. For more information about the other settings
	on the Switch page, see the online Help in the Cisco Unity Administrator.
Step 4	Click the Save icon, then click OK in the Warning dialog box.
	To specify switch settings for Cisco CallManager
Step 1	Go to System > Switch > IP Switch.
Step 2	In the Set Active Switch Type section, enter values as shown in the following
	table:
	Table 2-1 Switch Settings
	Switch Parameter	Required Setting
	Manufacturer	Cisco
	Model	CallManager
	Switch PBX software version	3.01 or later
	Integration	TAPI
Step 3	Click Set As Active, then click OK in the Warning dialog box.
Step 4	In the Access Code field, enter the trunk access code that Cisco Unity must dial
	to transfer calls to the traditional phone system from Cisco CallManager.
	The access code is the same number that subscribers on Cisco CallManager dial
	to reach someone on the traditional phone system.
Step 5	Click the Save icon, then click OK in the Warning dialog box.
	To modify voice port settings
Step 1	Go to System > Ports.

	Siemens 9751 9006i DTMF Integration Guide
OL-1747-02		2-5