Chapter 1 Siemens 9751 9006i DTMF Integration
Programming the Phone System
Table
Parameter | Required Setting |
|
|
TYPE | VCE |
|
|
AC | <the pilot number of the hunt group> |
|
|
DPLN | 0 |
|
|
STNP | <the extension numbers of the answering voice messaging |
| ports> |
|
|
NAME | CISCO UNITY VOICE MESSAGING |
|
|
CQMAX | 10 (the number of subscribers that may be queued when all |
| the ports are busy) |
|
|
FNA | N |
|
|
STYPE | CIR (circular hunt group) |
|
|
Make sure that the phone system sends calls only to Cisco Unity voice ports that are set to Answer Calls on the System > Ports page in the Cisco Unity Administrator. Calls sent to a voice messaging port not set to Answer Calls cannot be answered by Cisco Unity and may cause other problems.
Step 7 Go to menu 1.1 - System Parameters and set the following parameters.
Table
Parameter | Required Setting | |
|
|
|
Type of PBX VPMOD is on | 2 | - Other |
|
| |
Number of digits in an | (leave field blank) | |
extension (Used for MWI) |
|
|
|
|
|
Sender ID used for Telephone | 2 | - Calling Party if Known |
Answering Messages |
|
|
|
|
|
ACP Used for Integration | N |
|
|
|
|
| Siemens 9751 9006i DTMF Integration Guide |