Chapter 1 Siemens 9751 9006i DTMF Integration
Testing the Integration
Step 7 For the settings to take effect, exit and restart the Cisco Unity software. For more information, see Appendix A, “Exiting and Starting the Cisco Unity Software and Server.”
Testing the Integration
To test whether Cisco Unity and the phone system are integrated correctly, perform the procedures in the order listed.
If any of the steps indicates a failure, see the following documentation as appropriate:
•The installation guide for the phone system
•Cisco Unity Troubleshooting Guide
•This integration guide
To set up the test configuration
Step 1 Set up two test extensions (Phone 1 and Phone 2) on the same phone system that Cisco Unity is connected to.
Step 2 Set Phone 1 to forward calls to the Cisco Unity pilot number when calls are not answered.
Step 3 In the Cisco Unity Administrator, go to Subscribers > Subscribers > Profile.
If Example Subscriber is not displayed, click the Find icon (the magnifying glass) in the title bar, then click Find, and select Example Subscriber in the list that appears.
Step 4 In the Extension field, enter the extension of Phone 1.
Step 5 Click the Save icon.
Step 6 In the navigation bar, click Call Transfer to go to Subscribers > Subscribers > Call Transfer for Example Subscriber.
For more information on transfer settings, refer to the “Subscriber Template Call Transfer Settings” section in the Help for the Cisco Unity Administrator.
| Siemens 9751 9006i DTMF Integration Guide |
|
