![](/images/new-backgrounds/1156532/156532175x1.webp)
Replacing the keyboard
Tools you need to complete this task:
v
Scribe or |
Phillips #0 screwdriver
Screws removed during this task:
2 black M2.5×5 (Keyboard cover)
To replace the keyboard:
1Complete the steps in “Preparing the notebook” on page 55.
2Remove the keyboard cover by following the steps in “Replacing the keyboard cover” on page 78.
3Lift the center of the back edge of the keyboard slightly and, at the same time, press inward on the left side and then the right side. This will release the keyboard from the side tabs.
4Slowly slide the keyboard toward the LCD panel to release the keyboard retaining tabs located on the front edge of the keyboard.
5Carefully rotate the keyboard toward you so it lies
80 | Chapter 3: Replacing notebook components |