Acer R910 Series To set a Administrator/User password, To change the Administrator/User password

123

To set a Administrator/User password

1Use the up/down keys to highlight a password parameter (Set Administrator Password or Set User Password) then press Enter.

A password box will appear.

2Type a password then press Enter.

The password may consist of up to seven alphanumeric characters (A-Z, a-z, 0-9).

3Retype the password to verify the first entry then press Enter again.

After setting the password, the system automatically sets the chosen password parameter to Installed.

To change the Administrator/User password

1Use the up/down keys to highlight either change password parameters (Change Administrator Password or Change User Password) then press Enter.

2Type the original password then press Enter.

3Type a new password then press Enter.

4Retype the password to verify the first entry then press Enter again.

To remove the User password

1Use the up/down keys to highlight the Clear User Password parameter then press Enter.

2Enter the current password then press Enter.

3Press Enter twice without entering anything in the new and confirm password fields.

After doing this, the system automatically sets the User password parameter to Not Installed.