58

3 System upgrade

DVD drive

Removing the DVD drive

1Observe the ESD precautions and pre-installation instructions described on page 33.

2Disconnect the power and SATA cables from the SATA-to-IDE converter board on the rear of the media device (A).

3Press the blue release latch on the media device carrier (B).

4Slide the media device from the front opening in the faceplate of the system (C).

Installing the DVD drive

1Observe the ESD precautions and pre-installation instructions described on page 33.

2If necessary, remove the old DVD drive. See previous section.

Page 68
Image 68
Acer R910 Series manual Removing the DVD drive, Installing the DVD drive