47
7 Use the lever to push the HDD carrier until it docks into place (A),
then close the HDD carrier lever (B).
System fan assemblyThe system has two cooling fan assemblies — two fan modules each —
located on the front panel. Each assembly has an amber LED to
indicate a failed fan condition. If the amber LED is on, the fan assembly
needs to be replaced. The LED remains off during normal operation.
Removing the system fan assembly
Caution: System fan assembly hot-swap operations should be
performed only if a failure occurs in the system fan assembly.
1 Observe the ESD precautions described on page 33.
2 Locate the fan assembly you are replacing. If a fan in the assembly
has failed the amber LED will be lit (A).
3 Press the green button on the front of the fan assembly to release
the handle (B).
4 Use the handle to pull the fan from the system (C).