51

4Rotate the handle to the closed position (B).

5Tighten the thumbscrew to secure the power supply (C).

6Plug the power cord into the DC receptacle on the power supply.

7Verify that the LEDs on the power supply are functioning. Refer to the “Rear panel LED indicators” on page 14 for more information.

Memory board

The memory boards in the server connect to the mainboard through the x16 PCI Express slots or memory board slots A, B, C, and D. Refer to “Mainboard” on page 17 for the location of the memory board slot. Up to four memory boards can be installed in the server. Each memory board has four DIMM slots that support two DDR2 channels, with two DIMMs per channel. The memory boards support both single-rank and double-rank, registered ECC DIMMs.

The memory boards can be configured in a redundant or non- redundant configuration. Memory boards configured using RAID or mirroring are in redundant configuration. If a memory board that is configured in a redundant configuration has a DIMM or memory board fault, the memory board and/or DIMM containing the fault can be removed and replaced while the system is powered on. Memory boards that are configured in a non-redundant configuration (including memory boards configured with spare memory) must not be removed while the system is powered on.

Page 61
Image 61
Acer R910 Series manual Memory board