
Installing and Configuring Communications Software
If your modem came with a communications software package, it is strongly rec- ommended that you use this software for your modem. It’s default installation parameters have been specially configured to work with this modem. The Users Guide for this program can be found inside the modem package. It can be sup- plied in either
If you wish to use another software package, please be sure that it supports this modem. Most Software Manufacturers have a listing of supported modems on their websites or BBS’s. Check these sites to see if this model is supported. If you are unsure or your brand of software supports only a few modems, try selecting “Hayes Compatible” or “Standard Modem”. This may work in certain cases.
Some software programs allow manual input of parameters. For the users of these programs, here is a listing of the Data/Fax/Voice Command Standards supported.
Data: |
|
Fax: |
|
Voice: | TIA |
| and |
Init String: | AT&F&C1&D2W2 |
TIA
Caller ID
VoiceView™
Note: some programs must be configured to communicate with the mo- dem on the same COM port and or IRQ setting used by the modem. See the Installing the Modem section for instructions on how to determine your COM Port and IRQ settings in Windows 95.
Using the Modem’s Voice Features
This modem supports TIA
14