Actiontec electronic V.90 manual

Range: 0-127

Default: 8

S6 Wait Before Blind Dialing

The value of S6 specifies the amount of time that must elapse after the modem goes off-hook before the modem starts dialing the telephone number. The modem waits for at least 2 seconds before dialing even if the register is set for a value less than two.

Range: 2-255

Default: 2

S7 Wait for Carrier/Dial Tone

S7 specifies the length of time the modem waits to detect the remote modem car- rier after dialing. If the remote modem is not detected within that time, the modem hangs up and sends the “NO CARRIER” response.

Range: 1-255 seconds

Default: 60 seconds

S10 Lost Carrier Hang Up Delay

S10 is used to specify the length of time the modem waits before hanging up if the remote modem carrier signal is lost. When set to 255, the modem does not hang up when it loses the remote modem.

Range: 1-255 (1/10 of a second)

Default: 14 (1.4 seconds)

S11 DTMF Dialing Speed

S11 specifies the duration of DTMF (tone) dialing. This register is not used for pulse dialing.

Range: 50-255 ms.

Default: 70 ms.

S12 Guard Time

S12 is used to specify guard and detect times used for the escape sequence.

Range: 1-255 (1/50 of a second)

29