66
2. Blower (squirrel cage fan) and Fan Motor Component Replacement
a) Blower (squirrel cage fan) Motor Replacement
1) Discontinue electrical service to the dryer.
2) Mark and identify the wires that will be removed for proper reinstallation.
3) Loosen the bolts from the motor to the motor base ...
(a) Slide the blower (squirrel cage fan) motor forward.
(b) Remove the V-belts.
(c) Remove loosened bolts.
4) Remove the bolts from the bushing.
5) Insert bolts into the threaded holes.
6) Tighten the bolts evenly for motor pulley removal.
MAN3286
7) Mark the inside of the motors' shaft before removing the
bushing.
8) Loosen the set screws on the bushing.
9) Remove the bushing.
10) Measure the mark on the shaft (from Step #7) to the end of the shaft and mark the new motors'
shaft.
11) Slide the motor pulley on to the new blower (squirrel cage fan) motors' shaft.
12) Slide the bushing on to the shaft until the inside of the bushing meets the mark (from Step #11)
on the new motors' shaft.
13) Tighten and secure the set screws on the bushing.
14) Insert bolts into the large holes on the bushing and thread
them into the motor pulley.
15) Tighten the bolts evenly for motor pulley installation.
16) Align the pulleys.
17) Tighten (hand tight only) the bolts from the new motor to
the motor base ...
Leave enough movement for V-belt adjustment.
MAN3286