Manage Software and Configuration

MANAGE SOFTWARE AND CONFIGURATION
Update System Software

Using the Web interface HTTP Upgrade capability, you can upgrade the software (.bin) and http files on your modem. To complete an upgrade, specify the IP address of a server on the LAN side of modem where the new firmware is stored.

System

Software Update

The software update process takes about 90 seconds to complete and after the update the modem resets itself. Do not recycle the power during this process. This will cause permanent image corruption.

It is strongly recommended that you use this procedure to upgrade software rather than upgrading through a telnet session or through the Console port.

1Click System on the menu bar, then Software Update under [System] to access the Software Update page.

2Click Browse, locate the server on the LAN where the firmware image or configuration file is located, then click Open.

96

MM701G and MM702G User Manual