Configure a New WAN Session

Set Up a PPPoA or PPPoE Routed Session

You selected either PPPoA routed or PPPoE routed from the WAN Configuration page to display the following page. The PPPoA routed configuration page is shown below as an example. The configuration parameters for PPPoE routed are identical.

1Configure the following parameters for each session:

Session Name

Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters.

Virtual Path ID (VPI)

Enter the value (from 0 to 4,095) provided by the service provider. The number identifies the virtual path that transports ATM cells between the modem and the service provider. This value must match the virtual path identification (VPI) value the service provider uses for this connection.

32

MM701G and MM702G User Manual