ACCESSING THE A
COMMAND-LINE INTERFACE
You can manage the modem using either the command-line interface or the Web interface. Access to the command-line interface is accomplished by either direct connection to the modem console port or through a telnet session (over a network). This section provides instructions for accessing and using the command-line interface. Access to the Web interface is accomplished through a Web browser using an internet connection. Chapter 2, “Accessing the Web Interface for Modem Management” provides instructions on accessing and using the Web interface for management.
The Web interface is the more comprehensive of the two management interfaces and generally simpler to use. There are situations, however, in which using the command-line interface is preferred over the Web interface. For example, if you cannot connect to the modem through the DSL line and 10Base-T port, you can still manage the modem through the console port.
The following sections describe how to use the command-line interface:
MM701G and MM702G User Manual | 99 |
