Configure DHCP Server Mode

Enabled—The modem functions as a DHCP server and can serve IP addresses, a DHCP gateway, and a DNS server IP address to devices on your LAN. When the modem DHCP server is enabled, then LAN clients (such as PCs) must have their Internet protocol (TCP/IP) set to Obtain an IP address automatically (see page 19 for an example of where to select this option).

a Select Enabled, then click Configure to access the following DHCP Server page (DHCP Server cannot be enabled when the LAN protocol is in bridge mode).

bConfigure the following parameters when DHCP server is enabled for the modem:

DHCP Range Low

The lowest IP address value that the modem can serve when configured as a DHCP Server. A maximum of 20 IP addresses can be served by the modem. This IP address value is provided by your LAN administrator and must be on the same subnet as the modem LAN port.

DHCP Range High

The highest IP address value that the modem can serve when configured as a DHCP Server. A maximum of 20 IP addresses can be served by the modem. This IP address value is provided by your LAN administrator and must be on the same subnet as the modem LAN port.

20

MM701G and MM702G User Manual